Oct 29, 2012
Preface: We hope and expect that the severity of the hurricane is being overblown, and that the nuclear plants in the Northeast will ride out the storm without any incident.
We noted Friday that more than a dozen nuclear plants are near Hurricane Sandy’s path.
EneNews also reports that the hurricane is forecast to directly hit the Oyster Creek nuclear plant and that – while the plant is currently shut down for refueling – it still might very well have new, very hot fuel in the fuel pools:
Oyster Creek Nuclear Generating Station is located near New Jersey’s shoreline in an area forecast to take a direct hit from Hurricane Sandy: “The current ‘track center’ for the landfall path is central New Jersey pointing Sandy in a path that would hit Oyster Creek nuclear station.” -SimplyInfo
With Oyster Creek shut down for refueling starting last week, hot fuel may have been placed in the fuel pool quite recently.
The unit at Oyster Creek is the same as Fukushima Daiichi No. 1: “Oyster Creek is one of the oldest US nuclear plants and is the same design as Fukushima unit 1.”-SimplyInfo
Remember, Fukushima reactor number 4 was shut down for maintenance when the Japanese earthquake hit. And yet the fuel pools at reactor 4 are in such precarious condition that they pose a giantthreat to humanity.
Hurricane Sandy is not very intense in terms of wind speed. But the storm is so large, that storm surges could be 11 feet high.
Obviously, the path of the hurricane could veer substantially, and may not hit Oyster Creek after all … weather forecasting is not an exact science. But Gundersen argues that nuclear plants in Pennsylvania and New Jersey are in the most danger given current projections.
As we noted Friday, the Salem and Hope Creek plants in New Jersey are also near the path of the hurricane, as are the following plants in Pennsylvania:
Another concern is the Millstone plant in Connecticut:
EneNews summarizes the situation in a post entitled “Officials in Connecticut warn of giant 16-foot storm surge, with 15-foot waves on top of that — State’s nuclear plant directly exposed on ocean“:
In a message sent to residents Sunday afternoon, [Norwalk, Connecticut] Mayor Richard A. Moccia warned of a 16-foot storm surge brought to land by Hurricane Sandy. [...] “I have declared a state of emergency in the City,” he said. “Coastal flooding from this event will peak at midnight on Monday night and will be worse than any flooding Norwalk has experienced in recent history. If you have ever experienced flooding before it is likely you will be flooded in this storm.” Moccia said that the storm will be equal to a Category 4 hurricane and will produce 16 foot storm surges.
“The mood during the meeting was tense as federal officials estimated a 13-foot storm surge for Westport [Connecticut] -– 3 or 4 feet higher that the inundation from Storm Irene last year,” a news release said. “This is an unprecedented storm,” said [First Selectman Gordon Joseloff], following his team’s briefing with federal and state disaster preparedness officials. “This will be a storm of long duration, high winds and record-setting flooding. Take Storm Irene from last year and double it.” he said. [...] The town is bracing for at least three waves of flooding, beginning with the high tide at midnight Sunday, the announcement said. [... An] estimated 15-foot wind-driven waves [...] are expected on top of the storm surge.
According to the Weather Channel’s latest map, a 6 to 11 foot water level rise is forecast for the Connecticut coastline. This is the highest increase of any area in the US. The state’s only nuclear power plant is located directly on the ocean, see marker ‘A’ below:
In July, AP reported:
Millstone Power Station, Connecticut’s sole nuclear plant, is focusing on how best to guard against flooding and earthquakes to comply with tougher federal standards following the nuclear plant meltdown in Japan last year, the new chief of the power station said in an interview.
Millstone is assessing its ability to withstand flooding and “seismic events,” Stephen E. Scace, who took over as site vice president at Millstone in January, told The Associated Press on Thursday. He expects upgrades and installation of new equipment in the next three to four years.
This article was posted: Monday, October 29, 2012 at 6:11 am